Centrifugal Disc Finishing Machine - RM Series
Description
Principle:
•
RM Series Disc Finish Machine utilizes a stationary barrel wall with a rotating disk at the bottom. The rotating disk moves the parts, media with water upward and rubs against the stationary polyurethane wall of the working barrel. This continuous rolling and flow motion causes parts and media to contact each other in random or isotropic directions as well as the resulting finish is achieved the entire surface of parts
Principle:
•
Installed the stability of Germany reduction motor
•
The working barrel is coated with wear resistant of polyurethane ling to resist acid, alkaline, abrasion and eliminate the impingement of collision
•
With continuously rolling and flow motion to increase the grinding power while save the time and cost.
•
With CW/CCW and timing set-up control to achieve various requires demand from the parts.
•
Equipped with automatic compound dosing system
•
Working bowl with tilting ability and improve the work efficiency during unloading procedure
•
With CW/CCW and timing set-up to achieve various requiring demand from the parts.
•
Installed the drainage pump to enhance the efficiency of draining out the water while conduct the siltation and blockage in the pipe.
•
Working barrel is Installed the location detection device to ensure the unloading and returning purpose. This device can prevent the accident during operation.
Principle: | |
• | RM Series Disc Finish Machine utilizes a stationary barrel wall with a rotating disk at the bottom. The rotating disk moves the parts, media with water upward and rubs against the stationary polyurethane wall of the working barrel. This continuous rolling and flow motion causes parts and media to contact each other in random or isotropic directions as well as the resulting finish is achieved the entire surface of parts |
Principle: | |
• | Installed the stability of Germany reduction motor |
• | The working barrel is coated with wear resistant of polyurethane ling to resist acid, alkaline, abrasion and eliminate the impingement of collision |
• | With continuously rolling and flow motion to increase the grinding power while save the time and cost. |
• | With CW/CCW and timing set-up control to achieve various requires demand from the parts. |
• | Equipped with automatic compound dosing system |
• | Working bowl with tilting ability and improve the work efficiency during unloading procedure |
• | With CW/CCW and timing set-up to achieve various requiring demand from the parts. |
• | Installed the drainage pump to enhance the efficiency of draining out the water while conduct the siltation and blockage in the pipe. |
• | Working barrel is Installed the location detection device to ensure the unloading and returning purpose. This device can prevent the accident during operation. |